No. | Descripción | |
---|
1 | Accesorios para aparatos de recirculación de disolventes | |
2 | Accesorios para bureta automática | |
3 | Base, flexible, fundición a presión de zinc | |
4 | Soporte para los reactores de síntesis EasySyn Advanced y Starter | |
5 | Soportes | |
6 | [EN]: BEL-ART-support PE 20 x 30cm with hole in the middle | |
7 | [EN]: Burette stand of steel pate size 180 x 100 mm rod 450 x 10 mm Ø | |
8 | [EN]: Burette stand, base 127 x 203 mm | |
9 | [EN]: Centering holder for bottom blow-off valve | |
10 | [EN]: Column IXS-A02, 200 mm for IXS-A/M/NM, SXS, SXS-A/N | |
11 | [EN]: Column IXS-A04, 600 mm for balance IXS 30K-3N, IXS-A, SXS-A | |
12 | [EN]: DELUXE SAFETY STAND, TYPE ST200, H-SHAPE, STAND BASE 390 X UP TO 750 MM, ROD 1200 X 23 MM | |
13 | [EN]: Fixed height floor stand 0.9m | |
14 | [EN]: Ground Stand 1000 mm | |
15 | [EN]: H-stand MINI length 210mm, width 200mm cast, green laquered | |
16 | [EN]: H-Stativ, "Komplett" mit Alu-Stäben 12 mm und Muffen Höhe 800 mm, Breite 500 mm | |
17 | [EN]: Meßstativ AVS/HT von -80...+200°C | |
18 | [EN]: Meßstativ AVS/SK jedoch aus PVDF-Kunststoff, Temperaturbereich von 0°C bis +80°C | |
19 | [EN]: Meßstativ, Aluminium eloxiert, AVS/S f.d. Einsatz v.Kap.-Viskosimetern in Temperierbädern von -80'C...+80 | |
20 | [EN]: Pipette holder Trio for 3 pipettes | |
21 | [EN]: Pipette support PVC | |
22 | [EN]: Plastic tripod, PP Support rod 300 mm, Base plate 220 x 160 mm | |
23 | [EN]: Safety stand type KA1177, U-shape base: 340 x 290 mm, length 800 mm, Ø 23 mm stainless steel rod | |
24 | [EN]: Stand - 600 mm stainless steel | |
25 | [EN]: Stand 330 mm for EOC, IOC-M | |
26 | [EN]: Stand 500mm, stainless steel, incl. bottom plate | |
27 | [EN]: Stand base for burettes, rod Ø 12mm length 600mm, w.porcelain plate 190x170mm cpl. w. clamp, brass rolls | |
28 | [EN]: Stand for 6 ADPI-jars | |
29 | [EN]: Stand for flange size LF 100 cpl.with clamps and bossheads | |
30 | [EN]: Stand for flange size LF 60 cpl.with clamps and bossheads | |
31 | [EN]: Stand for reaction vessel w.fast closure LF 150, H 1,7 m, W 0,5m, D 0,35m cpl. with clamps and bossheads | |
32 | [EN]: Stand for reaction vessel w.fast closure LF 200, H 1,7 m, W 0,5m, D 0,35m cpl. with clamps and bossheads | |
33 | [EN]: Stand for wall mounting 2-piece with crossmuff, Swivel arm, lock screw | |
34 | [EN]: Stand SFE-A02, 400 mm, tiltable | |
35 | [EN]: Stand with base plate H-shape komplete 1000 mm LABOMECA | |
36 | [EN]: Stand with baseplate incl. Bosshead, dipping clipper and holding clamp | |
37 | [EN]: Stand with H-foot | |
38 | [EN]: Stand with plate | |
39 | [EN]: Stand, for LF 200, complete with sleeve, approx. W 1.0 x D 0.5 x H 2.0 m | |
40 | [EN]: Standard plate stand type ST110 plate: 200 x 350 mm, rod: 800 x 16 mm | |
41 | [EN]: Standard plate stand, type ST120, plate: 300 x 400 mm, rod: 1000 x 23 mm | |
42 | [EN]: Stativstange, 10 mm Drm. Edelstahl | |
43 | [EN]: Stativstangenhalterung TZ 1516 | |
44 | [EN]: Support rod 150 x 12 mm | |
45 | [EN]: Support rods Z 601 | |
46 | [EN]: Tripod for SW 1000, SW 2000 | |
47 | [EN]: Tripod set (acc./distilling-apparatus) | |
48 | [EN]: Tripod wooden for 12 extraction tubes | |