No. | Descripción | |
---|
1 | Adaptador metálico para conexión de tubo refrigerante y calentador | |
2 | Conector esmerilado plano | |
3 | Junta de esmerilado plano | |
4 | Pinzas de unión esmeriladas para conexiones de manguitos, alambre, acero al cromo-níquel | |
5 | Reactores de esmerilado plano | |
6 | Tapas con brida plana | |
7 | [EN]: Adapter, stainless steel M16x1 (internal) on M16x1 (external) for metal tubing system | |
8 | [EN]: Bearing ring stirr closure w/o glass part, Ø 16mm | |
9 | [EN]: Bottom carrier ring stainless steel tube 3/4" Oktagon DN 300, 2xbeam | |
10 | [EN]: Bracket ring connector DN 25 plastic | |
11 | [EN]: Bracket ring connector DN 40 plastic | |
12 | [EN]: Carrier mobile stainless steel, with stirrer support, closed version DN 300 | |
13 | [EN]: Carrier mobile, open form stainless steel tube V2A, with connecting element, 500x500x900mm, without rolls | |
14 | [EN]: Clamping ring PEEK Sliding ring RV10 Cone 50° | |
15 | [EN]: Connetor DN 300 stainless steel | |
16 | [EN]: Contact cable 1,5m length for connection thermosensor Thermostat PI-C30P | |
17 | [EN]: Coupling for stirrer type RF with torsion flute, stailess steel tensioning range= 6-8 mm | |
18 | [EN]: Dichtring DN 100 FKM | |
19 | [EN]: Dichtung 4-Kant aus FKM für Wellen-D. 10 mm | |
20 | [EN]: Dichtungssatz für Verschlußs DBGM, Typ A Spannbereich 5-11 mm mit NSK 29/32 | |
21 | [EN]: Dichtungssatz, PTFE für Welle 10 mm, Best.aus: 2 Lippendichtungen u. O-Ring | |
22 | [EN]: Dichtungssatz, PTFE für Welle 16 mm, Best.aus: 2 Lippendichtungen u. O-Ring | |
23 | [EN]: Dichtungssatz, PTFE/Graphit für Welle 10 mm, Best.aus: 2 Lippendichtungen u. O-Ring | |
24 | [EN]: Dichtungssatz, PTFE/Graphit für Welle 16 mm, Best.aus: 2 Lippendichtungen u. O-Ring | |
25 | [EN]: Disc for flange vessel DN150, Mh 29, 2xSh 29, Sh 14 | |
26 | [EN]: Disc for flange vessel DN150, Mh 29, 2xSh 29, Sh 29 | |
27 | [EN]: Disc for flange vessel DN200, Mh 29, 2xSh 29, Sh 29 | |
28 | [EN]: Doppelkupplung, Edelstahl zum Verbinden von 2 Glasflanschen Nennweite DN 15 | |
29 | [EN]: Double coupling, VA, for two glass flanges DN 25 | |
30 | [EN]: Drain valve "K" short design, complete without glass part | |
31 | [EN]: Druckschraube aus PTFE für Wellen 14/16 mm glasfaserverstärkt | |
32 | [EN]: Druckschraube aus PTFE für Wellen 8/10 mm glasfaserverstärkt | |
33 | [EN]: Dynamic Seal for Stirrers 19 with Double Seal in PTFE, for mandrel 10 mm | |
34 | [EN]: Dynamic Seal for Stirrers 29/32 with Double Seal in PTFE, for mandrel 16 mm | |
35 | [EN]: Dynamic Seal for Stirrers 29/32 with Double Seal in PTFE, for mandrel 10 mm | |
36 | [EN]: Dynamic Seal for Stirrers 45/40 with Double Seal in PTFE, for mandrel 8 mm | |
37 | [EN]: Dynamic Seal for Stirrers 45/40 with Double Seal in PTFE, for mandrel 16 mm | |
38 | [EN]: Dynamic Seal for Stirrers 45/40 with Double Seal in PTFE, for mandrel 10 mm | |
39 | [EN]: Dynamic seal for stirrers with plastic cap 10 mm, NS 29/32 | |
40 | [EN]: Ersatz-Glastrichter aus Duran für Rieseltestgerät nach Dr. Pfrengle, Auslaufrohr Drm 10 mm | |
41 | [EN]: Flachdeckel für Planschliffgefäße NW150, Mh NS 29/32, 2xSh 29/32s, 1 x NS 29/32g | |
42 | [EN]: Flat cover for shaving Pipes DN 120 | |
43 | [EN]: flat flange cover DN60s Mh NS 29/32 Sh 2x NS 14/23 angled ***DIN flange 12214*** | |
44 | [EN]: Flat flange lids NW 120 NS 29, 2xNS 29 angled, 1xNS 14 parallel | |
45 | [EN]: Flat flange seal with grooves PTFE, 25 DN | |
46 | [EN]: Flat flange vessel 1000ml, DN 120 type ADAV: cyl. form, thermostatic with bottom outlet valve | |
47 | [EN]: Flat flange vessel type ADAV 250ml cylin. form, thermostatic with bottom outlet valve | |
48 | [EN]: Flat ground connector DN 200 stainless steel, with suspension device for tube frame | |
49 | [EN]: Flat ground connector DN 200s stainless steel, with suspension device for tube frame | |
50 | [EN]: Flat ground flange reaction vessels 3000 ml | |
51 | [EN]: flat ground flange rection vessel 2000ml DN 120,flask/term. jacket without socket | |
52 | [EN]: Flat-gasket DN150 with Graphite for temperatures up to 400°C | |
53 | [EN]: Führungs-Druckhülse, PTFE glasfaserverstärkt für Welle 10 mm Drm. | |
54 | [EN]: Führungs-Druckhülse, PTFE glasfaserverstärkt für Welle 14/16 mm Drm. | |
55 | [EN]: Gabelklemme für NS 24 | |
56 | [EN]: glass cover for reactor | |
57 | [EN]: Glass part for ring stirring closure for 10 mm waces-Ø, with NS 29/32 | |
58 | [EN]: Glasteil für Gleitring-Rührverschluß für 10 mm Wellen-Ø, mit NS 45/40 | |
59 | [EN]: Glasteil für Gleitring-Rührverschluß für 16 mm Wellen-Ø, mit NS 45/40 | |
60 | [EN]: Guiding pressure sleeve, PTFE Glass fiber reinforced For shaft 8 mm Drm. | |
61 | [EN]: Holding ring for "Vario-Crip" DN 100 | |
62 | [EN]: HWS-Covers DN 60 MH NS 19/26, SH 3 x NS 14,4 HWS | |
63 | [EN]: HWS-flat flange gasket in ePTFE, DN 15 | |
64 | [EN]: HWS-Flat range gasket, PTFE with insert, DN 120 | |
65 | [EN]: Kreuzmuffe 30 mm, Alu | |
66 | [EN]: Mechanical agitator seal Body and agitator shaft holder PEEK Seal rings/O-rings FKM/FKM | |
67 | [EN]: Metal adapter for metal hose DN 15 Thread M30 x 1.5 | |
68 | [EN]: Metal adapter for NW 25 thread M 16 | |
69 | [EN]: Metal tubing length 1,0 m thread connection M 16 | |
70 | [EN]: Metal tubing length 1,5 m thread connection M 16 | |
71 | [EN]: Metal tubing length 2,0 m thread connection M 16 | |
72 | [EN]: Metallschlauch Länge 3,0 m Gew.Anschl. M 16 | |
73 | [EN]: Microflon blue seal for DN15p | |
74 | [EN]: O-Ring DN 120 FKM für Planflansch nach DIN 12214 | |
75 | [EN]: O-Ring DN 150 für Planschliffe inkl. Nut, Silikon | |
76 | [EN]: O-ring for flat flange vessels DN 60s incl. nut, system "s", silicone, FEP | |
77 | [EN]: O-Ring NW 100 S aus Silikon FEP-ummantelt mit Nut | |
78 | [EN]: O-Ring NW 100 S FKM | |
79 | [EN]: O-Ring NW 100 S Silicone | |
80 | [EN]: O-ring NW 120 S made of silicone, FEP coated | |
81 | [EN]: O-Ring NW 150 S aus Silikon FEP-ummantelt | |
82 | [EN]: O-ring sealing for NW 120 S made of silicone, DIN 12.214 | |
83 | [EN]: O-Ring, Silikon/FEP-ummantelt für Rotulex 13/5 | |
84 | [EN]: O-sealing DN 200 glueless FEP-coated | |
85 | [EN]: Over pressure valve NSK 29/32 0,5 bar | |
86 | [EN]: Pin a spanner stainless steel, DN 25 | |
87 | [EN]: Pl.-Deckel FI/DIN NW 100 H 125, MH NS 29/32 SH 4x NS 29/32 schräg | |
88 | [EN]: Pl.-lid DN 100 middle neck NS 29/32, 3 side neck NS 14/23 angular 1 side neck NS 14/23 straight | |
89 | [EN]: Pl.-reaction vessel 20000ml 2 x DN 15 p, flask/temp. | |
90 | [EN]: Pl.-reaction vessel 30000ml DN 300, flask/temp. | |
91 | [EN]: Pl.-reactions vessel 50000ml DN 300, flask/temp. | |
92 | [EN]: Pl.-reakcion vessel 40000ml DN 300, flask/temp. | |
93 | [EN]: Pl.-Reaktionsgefäß 2000ml Typ ADAV, zylindr., mit Heizmantel und Bodenablauf-Ventil | |
94 | [EN]: Pl.-Reaktionsgefäß 500 ml | |
95 | [EN]: Pl.-Reaktionsgefäß 500 ml | |
96 | [EN]: Planschliff-Flachdichtung PTFE, für DN 100 | |
97 | [EN]: Planschliff-Universal-Verbinder NW 150 HWS-Flansch mit Stativstäben | |
98 | [EN]: PS universal connector for carrying frames, (tube Ø 13 mm) | |
99 | [EN]: PS Vessel 2000ml ADAV DN150, drain valve "T" 10mm, | |
100 | [EN]: PS-Verbinder DN 150 für Rohr 27 mm | |
101 | [EN]: PTFE collar sealing DN 25 | |
102 | [EN]: PTFE comb seal DN 100 | |
103 | [EN]: PTFE comb seal DN 120 | |
104 | [EN]: PTFE-collar sealing DN 40 | |
105 | [EN]: PTFE-Dichtung für DN 100 mit Rillenzentrierung | |
106 | [EN]: PTFE-Flat Flange Seal DN 15, with Grooves | |
107 | [EN]: PTFE-flat sealing DN 300 | |
108 | [EN]: Quick fixing "Vario Grip" (nichrome) DBGM, "HWS" | |
109 | [EN]: Quick fixing "Vario Grip" (nichrome) DBGM, DN 100, "s" | |
110 | [EN]: Quick fixing "Vario Grip" stainless steel, complete profile ring made of PP, NW 100, "HWS" | |
111 | [EN]: Quick release clamp, nichrome for "s" system, DN 100 | |
112 | [EN]: Quick release clamp, nichrome for "s" system, DN 150 | |
113 | [EN]: Quick release made of nichrome for NW 100s, (flange according to DIN 12.214) with 2 tripod bars Ø 13 mm | |
114 | [EN]: reaction vessel accessories Modell T 10mm | |
115 | [EN]: Rührkupplung mit Doppelkardan aus Edelstahl f. IKA RW 28 | |
116 | [EN]: Rührkupplung mit Doppelkardan aus Edelstahl für Rührer KPG 16 mit GL 14 | |
117 | [EN]: Rührkupplung mit Edelstahl Faltenbalg Mod. RV 6-8mm | |
118 | [EN]: Rührkupplung Typ CF mit Torsionsfeder, Spannbereich-D= 5...9 mm | |
119 | [EN]: Rührkupplung Typ CV Spannbereich-D= 5...9 mm | |
120 | [EN]: Schlaucholive GL 18 gebogen | |
121 | [EN]: Seal kit, PTFE for wave 8 mm, 3-parted | |
122 | [EN]: Seal kit, PTFE/Graphit for wave 8 mm, 3-parted | |
123 | [EN]: Sealing, silicone/PTFE | |
124 | [EN]: Sealing, silicone/PTFE | |
125 | [EN]: Sliding ring stirrer seal NS 29, Ø 10 mm | |
126 | [EN]: Sliding ring stirrer seal NS 29/32, Ø 10 mm seal rings FKM/FKM, O-rings Perfluor / FFKM | |
127 | [EN]: Sliding ring stirrer seal NS 45, Ø 10mm | |
128 | [EN]: Sliding ring stirrer seal NS 45, Ø 16 mm | |
129 | [EN]: Solid matter dosing feeder DOSINI 250 ml, GL 32, NS 29, with electrical PTFE-charging screw | |
130 | [EN]: Stirr closure "Dyna" with cone NS 29/32 for wave-dia. 10 mm with radial needle bearing | |
131 | [EN]: Stirr coupler Type RV/E with stainless steel folded bag, range-D: 12-14 mm | |
132 | [EN]: Stirr cover NS 29/32 with double PTFE-lip seal, for wave 8 mm | |
133 | [EN]: Stirrer Seal 29/32 with GL 14 for Gas Inlet, for mandrel 10 mm | |
134 | [EN]: Stirrer Seal 45/40 with GL 14 for Gas Inlet, for mandrel 10 mm | |
135 | [EN]: Support ring DN 150/200 | |
136 | [EN]: Support with olive straight, DN 15, A 13 | |
137 | [EN]: Supporting Device DN 100 for tube 27 mm | |
138 | [EN]: Supporting ring DN 150 Polyester, with support rod | |
139 | [EN]: Surface grinding connector NW 100 HWS-flange w. support rods | |
140 | [EN]: Tray for VD 03 stainless steel | |
141 | [EN]: Tropftrichter 500 ml, NS 29 grad. mit hohlem Küken und Spannsicherung | |
142 | [EN]: Tube adapter for rod 16 mm | |
143 | [EN]: Tube adapter for rod 20 mm | |
144 | [EN]: Tube Coupling GL18 | |
145 | [EN]: Universal connector stainless steel DN 200s for carrying frame tube D 13 mm ***DIN flange system 12214*** | |
146 | [EN]: Valve insert complete (without glass parts), PTFE | |
147 | [EN]: Valve, pneumatic, type PT stroke length adjustable | |
148 | [EN]: Valve, pneumatic, type PT/P stroke length adjustable | |
149 | [EN]: Verschluß, Spannbereich 2...5 mm Ø gerade Durchführung mit Dichtungssatz vakuumdicht, mit Schliff NS 14 | |
150 | [EN]: Verschluß, Spannbereich 5...10 mm Ø mit Dichtungssatz DS 02, mit Kegelschliff 29/32 | |
151 | [EN]: Verschluß, Spannbereich 5...11 mm Ø Kegelschliff 29/32, mit kunststoffkappe | |